ALUMINUM CAN  MACHINE EQUIPMENT      
                                                                                                                      Index
                                                                                                        Page : 1. 2. 3.

  
 S-B23B    AUTOMATIC FEEDING MACHINE　自動鐵皮供料機

S-B1A    AUTOMATIC GANG SLITTERS (SINGLE)    自動單式輪刀剪鐵機


　

Specification

S-B23B equipped with magnet sets (or air blowing system) and vacuum generators for tinplate or alu. sheet suction and separating.
Then sheet be transferred to S-B1A automatic Gang Slitter for strip cutting.
 The S-B1A cutter shaft equipped with tapper roller bearings on each end, ensure strips with maximize accuracy for stamping press. Mechanical clamping hubs are also equipped.

　
機　　　　　型　　MACHINE TYPE S-B23B S-B1A
馬口鐵最大尺寸　　Max. tinplate size 1145 x 1145 mm 1060 x 1060 mm
馬口鐵最小尺寸　　Min. tinplate size 600 x 600 mm 500 x 500 mm
最 大 鐵 皮 厚 度       Max. sheet thickness 0.4 mm 0.4 mm
每  分  鐘  產  能        Capacity per minute UP to 40 SPM UP to 36 SPM
需　要　馬　力        Horse power required 1HP x 1 ; 1/2 Hp x 1 ; 1/4HP x 1 2 HP
淨　　　　　重        Net weight (approx.) 1270 kgs 1100 kgs
安裝面積及高度        Floor space overall height 2820L x 2120W x 1670H mm 3000L x 1380W x 1030H mm

　

FEATURES
  • With vaccum pads for sheet suction.
  • With hydraulic cylinder to control height of sheets automatically.
  • Cutter shafts ø 90mm adopted to ensure strip dimension and squareness.
  • Simple desing, easy maintenance and changeover for different can size.
  • Equipped with mechanical clamping hubs.
  • Carbide cutters are available on request.

                          
　

                                                                 Page : 1. 2. 3.                    Top