TIN CAN  MACHINE EQUIPMENT      
                                                                                                                                                      Index
      Page  1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.


 S-D3-20   INCLINABLE POWER PRESS 　可傾式強力沖床

 

　

Specification

S-D3-20 is designed for multiple function, such as aerosol Shell reforming or DRD can trimming or irreqular ends curling, usually connect with auto press.
Toolings are made from special alloy steel and with harden treatment.
With high safety design for personnel engaged in production, setting and maintenance activities.  It satisfies the requirement of modern can making.

　
　功　　用　        　Machine Function 沖模　PRESSING 捲綠　CURLING 修邊　TRIMMING
　曲軸行程　　　　Length of Stroke 80 mm 80 mm 100 mm
　最大閉合高度　　Max. Shut Height of Tools 165 mm 165 mm 180 mm
　沖模孔徑　　　　Shank Diameter ø 39.69 mm ←← ←←
　平板台面積　　　Bolster Area 570 x 360 mm ←← ←←
　每分鐘產能　　　Capacity Per Minute UP TO 60 CPM UP TO 65 CPM UP TO 80 CPM
　需要馬力　　　　Horse Power Required 2  HP ←← ←←
　淨　　重　　　　Net Weight (abt) 1100 KGS ←← ←←
　安裝面積高度　　Floor Space Overall Height 1520 x 890 x 1960 ←← ←←

　

FEATURES

  • Can connect with conveyor to Auto Press to reduce labor cost.

  • With Air Cylinder for clutch actuating, effective but low maintenance.

  • Multi-safety design for machine and personnel safety.

  • Easy for can size changeover and adjust.

  • Perfect products and built for long life, satisfy the requirement of can making.

    Page  1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.                            Top