High -Low Viscosity Stirrer         Full Automatic Vacuum  

                                                Emulsification device

Fully Automatic Vacuum         Lifting Emulsification

Emulsification Installation       Stirring Machine

Item No. SY-HME

Product Name: Vacuum Emulsify Mixer

This machine is composed of one blade mixer for high viscosity and one

micro homongeneous high speed mixer with high strength-cut-off.

There are scrapers attached to scrap the inner wall of the container to make the new interface generation in the treated solution continuously.

The treated solution, is treated by the cut-off. compress and fold-up of the blade, will flow down the right position of the homogeneous mixer by the way of blade mixing.

The mixing part of the homogeneous mixer is composed of a unique turbine with a high rotary speed and a radial stator having the flow refractive plates. The pressure at the bottom and upper part of the turbine generated by the high speed rotations of the turbine has the functions like those of the rotations of a pump and is continuously sucked upward by the treated solution.

The sucked solution that is sucked on the stator is freely handle by the strong cut-off. lmpact and turbine current processed produced between the turbine under high-speed rotations and the stator and therefore is pulverized and dispersed and then is sprayed upward and out from the top spray outlet.

As mentioned in the above, the homogenous mixer and blade mixer have their own respective mutually complementary features, so their effect are doubled to effectively treat the emulsification and mixing of the high viscous materials.

Features:

1. Emulsifying and mixing super viscous materials ( about 50,000 C.P.S. )

2. To Directly suck the raw materials into the tank by thie machine.

3. A set of this machine can do the integrated operations of vacuum,

   heating , cooling process.

4. Pulverization, emulsification, mixing and uniformity and dispersion can  

    be completed within a short time.

5. The Homo Mixer and Paddle Mixer can be used separately.

6. Operation is by button automatically. It also supply record function for  

    product except time control.

7. The material contacted the liquid is stainless steel to prevent corrosion .

8. It can reduce the air and bacteria contamination by mixing in the

    vacuum. To keep the product hygiene and stability.

9. Automatic clean device ensure the cleanliness of the part contacted

    liquid,

USAGE:

Coating, food stuffs, pharmaceuticals, cosmetics, Pigments, dyes and aids, general chemicals, and various synthetic fiber, leather, and

plasticizer.

Specification:

Item No.: SY- HMD

Product Name: Vacuum Dispersion Mixer

Food Powder Material Conveyor    Automatic Food Additives

                                                  Feeding System

Pressure Stirring Vessel         Salad Manufacturing Equipment

Item No. : SY-GM

Product Name: High Speed Mixer Granulating Machine

The principle of its mixing is by using the high speed rotation of mixing wings to general force force in mixing different forms of powders.

The mixing tank is designed with a flat bottom, cylindrical post and the top of the tank is a conical shape, so that the force that pushes the powder goes up, so the rotation force pushes the powder down to the center of the tank. Also, the auxiliary shaft is powerfly with powerful shearing, wheter it is mixing a small quantity of additive or different specific gravity and size of powder.

 It is able to differentiate and divide into grou0ps then complete the mixing accurately. Convection formed through the coordination of granule powder and the main and auxiliary shafts of mixing wings in the mixing tank enables this machine to perform its optimum efficiency in mixing quality and provides extensive use.

This machine has various specification and variable accessories that can satisfy the requirement of various manufacfurers in manufacfuring their products. Each pharmaceutical plant can also apply it according to its different shapes required and raw material contents.

Feature:

* Conforming to GMP requiremnet, it is easy to disassemble and clean.

* It is very easy to disassemble and dismantle the mbin mixing wing. Just

   push the mixing wing upward.

* Powder will not contaminate the main axle. It is easy to clean the shaft

  designed with an air seal return with clear water.

* Cross shape multi-stage blade has excellent sharing power. Using the

   cross multistage blade blade can patrilly cut the circulation flow of powder

   continuously to fineness, and facilitate easy dismantling, cleaning, and

   maintenance.

High Speed -Mixing Granulating Machinery

Description:

The main shaft blade is used for mixing. Shaft attached on the bowl wall has the function of high-speed-cut, granulating and distribution, The material will flow, as the form of semi-sphere, by the way of center blade rotation because of  the design of mixer bottom, Have the material achieve precision mixing within 3~5 minutes by the high-speed distribution of 3600 RPM. Trace additives such as water, solvent and paste for wet granulation to form even granule can be achieved.

High Speed Kneading Machine

Description:

Special rotation design, main shaft blades, balance correction, high speed stirring blades, sealed cover structure, adjustable turbulent damper angle, chute jacket device for cooling in order to not destroy its original property, especially for heat sensitive cosmetic powder. Can be used in vacuuming, heating, cooling, pressurizing, trace spraying. Dismountable blades for assembly. Easy to clean. Can use non-variable RPM.