Product Name: Water Chiller
This high-performance water cooling chiller series is engineered with
outstanding chiller technology. This is fully reflected in each water
chiller. All chillers also utilize world class compressors from Europe and
America that provide high EER, power saving and quiet running performance.
Each chiller also has touch sensing controls as well as comprehensive
safety guards such as :
- motor reverse running control
- compressor overload protection
- automatic power off when control opened
- poor heat dissipation protection
- cooling tower overload protection
- LED display of malfunctions
- insufficient cooling media protection
- insufficient cold water flow control
- emergency stop
- anti-freezing
- power off if overload occurs
- IC trouble alarm
- chilling pump overload protection
- lack of phase running protection
- cooling media over pressure control
- sequential delay start for multiple units
- water circuit by-pass design
¡@
Specification:
|
Specification\Model
|
Units
|
KT-130
|
KT-150
|
KT-750
|
KT-1000
|
KT-1500
|
|
Cold Water Temp.
|
¢XC
|
5¢XC ~ 25¢XC
|
||||
|
Refrigerating Energy
|
Kcal/hr
|
9375
|
¡@15423 | 23866 | 31502 | 46623 |
|
Refrigerating Capacity
|
BTU/hr
|
37200
|
¡@61200 | 94700 | 125000 | 185000 |
|
Power Supply
|
V
|
3Ø/220V/60Hz | ||||
|
Rated Power
|
KW
|
2.6 | 4.5¡@ | 7.1 | 9 | 12.8 |
|
Compressor Horsepower
|
HP
|
31 | ¡@5 | 71/2 | 10 | 15 |
|
Pump Horsepower
|
HP
|
1/2 | ¡@1 | 2 | 2 | 2 |
|
Dilation Water Tank
|
Liter
|
80 | ¡@80 | 130 | 130 | 260 |
|
Cold Water Fitting Pipe
|
inch
|
1" | ¡@1" | 1-1/2" | 1-1/2" | 2" |
|
Cooling Water Fitting Pipe
|
inch
|
1" | ¡@1" | 1-1/2" | 1-1/2" | 2" |
|
Cooling Medium
|
R
|
22
|
||||
|
Temperature Control
|
Micro-Computer LED and touch-screen temperature controller
|
|||||
|
Size (LxWxH)
|
cm
|
90*68*116 |
127*76*124 | 172*82*133 | ||
|
Weight
|
kg
|
200 | ¡@250 | 380 | 450 | 550 |
| ¡@ |
¡@
| SELF-DIAGNOSTIC FUNCTIONS: If trouble occurs, the operator is alerted by an alarm sounding, and the trouble is desplayed on the control panel. 1.The arm features anti-drop in case of insufficient air pressure or power failure. 2.Fast motion- The product extract time is only 0.7 second. Entire cycle time is about 3 seconds. 3.High positioning accuracy and high stability. The robot is precision constructed throughout. All strodes have shock absorbers. Time setting accuracy is 0.1 second. these assure accurate positioning and maximum stability at high speed operations. 4.In the event of gripping failure, the operator only needs to open the safety door, take out the product and close the safety door. Then machine motions will restart automatically with no resetting necessary. 5.The arm can be quickly swiveled to 90 forward and backward. 6.The lubrication free air circuit eliminates problems caused by lack of lubrication, and avoids oil contamination on the product. 7.Centralized speed control for convenience. 8.Adjustable arm position increases vertical stroke. 9.The air operated gripper eliminates electrical short circuit problems. Sprue dimensions from 1 to 10mm can be positively sensed. |
¡@
Specification:
| MODEL | HC-T525P | HC-T625P |
| Suited for infection molding machines | 50-180 Tons | 180-250 Tons |
| Power source | 220V¡Ó10%, 50/60HZ | |
| Electric consumption | 2A | |
| Air pressure | 5kg/c¢T | |
| Drive system | Air cylinder | |
| Take-out stroke (mm) | 550mm | 650mm |
| Longitudinal stroke (mm) | 100mm | |
| Posture | 70¢X~90¢X | |
| Fastest cycle time | 3.0 sec. | 3.2 sec. |
| Fastest extract time | 0.7 sec. | 0.8 sec. |
| Max. grip weight (Jip weight included) | 1000g | |
| Air consumption (AT 5kg/c¢T Pressure) | 12.7 | 14.4 |
¡@